Our Products.

  1. General Product Material Spec
  2. Pipe
  3. High Pressure Manifold Fittings
  4. Wrought Steel Fittings
  5. API 6A Type 6B & 6BX Flanges
  6. ANSI B16.5 Flanges
  7. API 6A Crosses and Tees
  8. Hammer Lug Unions
  9. API 16A Hubs and Clamps
  10. Pipeline Hubs and Clamps
  11. API 6A Gate Valves
  12. API 5000PSI Mud Gate Valves
  13. API 7500PSI Mud Gate Valves
  14. API 6A Plug Valves
  15. API 6A Choke Valves
  16. API 6a Drilling Manifolds
  17. High Pressure Hoses
  18. Low Pressure Hoses

Pipeline Hubs and Clamps

Hubs are available as Weld Neck, Integral and Blinds and are available in the following material and pressure ratings:-

HUBS CLAMPS SEALRINGS
  A350 LF2 MOD AISI 4130 A182 F316L A182 F51 AISI 4130 A182 F304 AISI 4130 A564 630          (17-4PH)
Min. Tensile 70,000 PSI 90,000 PSI 75,000 PSI 90,000 PSI 100,000 PSI 75,000 PSI 100,000 PSI 115,000 PSI
Min. Yield 52,000 PSI 60,000 PSI 30,000 PSI 65,000 PSI 75,000 PSI 30,000 PSI 75,000 PSI 75,000 PSI
Hardness (Max.) 197 BHN 235 BHN N/A 28 HRC 22 HRC N/A 22 HRC 33 HRC
Impact Values 54/40 Joules 40/32 Joules N/A 70/65 Joules 42/32 Joules N/A 27/20 Joules 27/20 Joules
Impact Test Temp. -46 Deg C -46 Deg C N/A -46 Deg C -46 Deg C N/A -46 Deg C -46 Deg C
Temper Temp. 650 Deg C 650 Deg C N/A N/A 620 Deg C N/A N/A N/A

Our spec-sheet includes all the relevant information regarding our products. You can download it below. Feel free to contact us if anything isn't clear or for any more information.

Download Now

If you would like to download the brochure for our entire range of products, please click this link.

Email Us info@at-engineering.co.uk